How to Fix Error 0xc000000e

After discussing How to Overcome the CRITICAL_STRUCTURE_CORRUPTION Error, this time the admin will discuss How to Overcome Error 0xc000000e. When using a computer, you may experience a Blue Screen of Death (BSOD). One type of BSOD that often appears is 0xc000000e.

Cause of Error 0xc000000e

The exact causes for the 0xc000000e error are quite diverse, such as the inaccessible or corrupt winload.exe file, even the boot location for the operating system cannot be found.

How to Fix the 0xc000000e Error?

Solution 1: Check Device Connection

This is the easiest solution but is often overlooked. When the computer experiences an error 0xc000000e, you can first check if there are other devices connected to the computer.

Why is it necessary to do this check? because the BIOS or UEFI configuration can be configured in such a way that any attached external device has a higher boot priority than the hard disk.

If so, the computer may try to boot from the attached external disk and result in error 0xc000000e. Some devices that can cause errors include external USBs, pen drives, CDs, DVDs, etc.

 

Solution 2: checking boot configuration

Boot Configuration Data, also known as BCD, contains boot configuration parameters on how to start the Windows OS. If the configuration file is corrupted, Windows 10 will fail to boot and result in error 0xc000000e.

To repair corrupted configuration files, you will need to rebuild the BCD on the computer.

#Note: Since Windows is not bootable, you will need to install Windows and then boot from it.

– Click Next when you see the screen after booting the computer from USB media.

– Don’t click the Install Now button. Click on Repair Your Computer in the lower left.

– Open Troubleshoot> Advanced options> Command Prompt.

– Choose the account you use.

– Type the following command and press Enter bootrec / rebuildbcd

– When Windows installation is found, press Y on keyboard to boot. This step will rebuild the BCD.

– When the operation is finished, type bootrec / fixmbr and bootrec / fixboot respectively, and press Enter after each command.

 

Solution 3: Run Windows Startup Repair

Windows Startup Repair is able to diagnose and repair computer problems. It can automatically scan system files, registry settings, configuration settings, etc.

If you have USB boot media, set the computer to boot from it and go to Repair your computer.

After that, go to Troubleshoot> Advanced options> Startup Repair. Windows will start diagnosing the computer and fixing any problems.

 

Solution 4: Enable Windows 8.1 / 10 WHQL Support in BIOS

There are two basic functions of this feature: it checks for drivers that are signed during the boot process and allows you to enable UEFI support.

If you are using Windows 8.1 / 10, you will need to activate it and the computer can boot normally. However, if it is not selected, the computer may experience an error 0xc000000e.

It should be noted that Windows 8.1 / 10 WHQL Support setup is not supported on all computers. If your computer doesn’t have it, please check if the UEFI support is enabled on the computer.

 

Solution 5: Reset BIOS / UEFI Configuration

Some users say that the 0xc000000e error can be resolved by resetting the BIOS / UEFI configuration. So, you can try doing this and see if the error is resolved or not.

Those are some tips on How to Overcome Error 0xc000000e that you can try. Hope it is useful.

1 thought on “How to Fix Error 0xc000000e”

Leave a Comment